• REX PP 315 Series

    Fiber Laser Cutting Machines

    Nukon - REX PP 315 Series

REX 315 Pipe Cutting.

 
 
Pipe cutting.
 
  • Suitable for cutting and engraving various metal pipes and tubes such as stainless steel, carbon steel, mild steel, alloy steel, galvanized steel, silicon steel, spring steel, titanium, etc.
  • Applicable to advertising, crafts, decoration, lighting and other metal processing industry.
Auto detection.
 

The angle of the sheet and its corner are found automatically by using 3-point detection method on the sheet.

Blow piercing.
 
 

Produces smaller piercing holes faster in mild steel up to t16mm in thickness by controlling the oxidation reaction and optimizing beam quality.

Partitioned dust collection system.
 

An automatic flap opens and closes according to the movement of the processing head, offering on-the-spot dust collection during processing.

Crust Reduction control.
 

CR Control reduces dross adhesion at corners, realizing high-speed processing while maintaining high quality.

Beat piercing.
 

High -peak power control realizes the same level of quality as the previous slope piercing while reducing the piercing time of mild steel up to 12mm by a maximum of 50% compared to the previous model.

Cutting Head.
 
 

The cutting head achieves best results in 2D cutting. It is a cutting head especially developed for fiber lasers. It provides cutting edges with defined quality.

For operators of cutting machines, productivity is an important factor for success. The cutting head fulfills this requirement completely since it can cut metal sheets of different thickness without manual intervention. This is made possible by the special optics of the cutting head which allows automatic control of focus position and focus diameter (from 65 µm up to 145 µm) by the CNC control unit. In combination with quick focus movements on the workpiece, this enables efficient flat-bed cutting and a maximum of productivity. The cutting head is provided with 2 protective glasses, one in front of the cutting lense and one in front of the collimator lense.

Thanks to this structure, the protective glass is brought to a higher position (163 mm) so that the lifespan is significantly extended (up to 3 times). Furthermore, the cutting head ensures a high cutting quality. The optics have been designed so that the laser induced focus shift is minimized and the reproduction quality is diffraction-limited.

The nozzle can be easily adjusted manually in X and Y direction using lockable precision screws.

Larger internal gas flow channels ensure a more stable vertical gas flow and thus a higher cutting speed and cutting quality.

 

Thanks to its modular design, can be ordered different configuration according to specific needs and requirements.



  • Manual focus adjustment
  • Automatic focus adjustment through "Z – collimator module"
  • Automatic adjustment of the focus and depth of the laser beam by "MZ – collimator module"
  • Sensor contamination of lens
  • Focus adjustment position
Resonator.
 

Fiber laser – the big innovation of today’s technology, with exceptional reliability and high beam quality, has many advantages:

  • High output power
  • High quality of laser beam
  • Less focus larger working distance
  • Over 30% coefficient of efficiency
  • Modular design „connect and start“
  • Compact, solid and easy to install
  • Low operation costs
  • Flexible and durable fiber optic cable
  • High electrical efficiency
  • Lifespan of the diodes over 100,000 hours
  • Low requirements for cooling
Lantek Expert Cut CAD/CAM.
 

Nukon Fiber Laser uses Lantek Expert Cut CAD/CAM with it’s own postprocessor.

For ease of cutting it has many features like auto nesting and machining, calculating the time, micro-joint, total-cut and more.

All data for cutting is installed in the technological Lantek charts. This program is designed for nesting and machining and is installed directly on the CNC, without any adjustment of the cuttingarameters.resimlantek.

Lantek has some additional features – if it’s unable to cut a hole smaller than 0.5mm by the thickness of the material – it will be marked automatically.

RADPROFIL Cut – RADAN.
 
 

Nukon Fiber Laser using software Radprofile Cut Cad / Cam with its own postprocessor.
For ease of cutting has many features like auto nesting and machining, calculating the time, micro-joint, total cut and more.
All data for cutting installed in the technological Radan charts. This program is designed for nesting and machining and is installed directly on the CNC, without any adjustment of the cutting parameters.
Radan has some additional features, if it is unable to cut a hole smaller than (0.5mm by the thickness of the material), it will be marked automatically.
Radan is a fast, modern programming application designed to assist in transferring data from CAD to NC code.

 

Easy programming



  1. Preparing a normal cutting
  2. Cutting with pre-piercing
  3. Sheet metal clearances
  4. Clearances between parts
  5. Preparing common cut
  6. Edit cutting speeds
  7. Adding new material to the list
  8. Using remnant option(saving excess parts of the sheet)
  9. Marking
  10. Giving radius at the corners
  11. Modifiying corners as 90 degrees
  12. Defining cutting technology (cut1, cut2)
  13. Giving micro joint for nested parts
  14. Changing the length of the entrance properties
  15. Preporting writings with marking property
  16. Change cutting direction
  17. Scaling dimensioning
  18. Combining the intermittent lines
  19. Film burning for covered staintless steel
  20. Cut 1 , Cut 2 , Cut 3 ,Cut 4 Ve Small Hole property changing
  21. Edge clearances of the unit sheet
  22. Editing the automatic machining option
  23. Marking speed
  24. Defining cutting direction while doing automatic contour
  25. Adjusting of sheet remnant
  26. No cutting
  27. Change radius
Technical Specifications.
SUBJECT FEATURES
Technical Specifications REX 315 PP
Type Flying Optic Head
Cutting Head Auto Focus Head Manual Focus Head

Sheet Dimensions

4,5’ x 9.8’ / 1530 x 3050 / 60”x120”
Resonator (IPG) 2KW 3KW 4KW 5KW 6KW
Fiber Laser Diameter .004” /100µm .004” /100µm .004” /100µm .004” /100µm .004” /100µm
Maximum Cuting Capacity Mild Steel .625”/16mm .709”/18mm .78”/20mm .86”/22mm .98”/25mm
Stainless Steel .236”/6mm .394”/10mm .47”/12mm .59”/15mm .78”/20mm
Aluminum .197”/5mm .315”/8mm .397”/10mm .47”/12mm .59″/15mm
Brass .118”/3mm .197/5mm .236”/6mm .314”/8mm .394″/10mm
Copper .118”/3mm .197”/5mm .236”/6mm .314”/8mm .394″/10mm
Power Supply Consumption 460V/3PH (Avialable in 220V/3PH) ±%10 19 kW 24 kW 32 kW 45 kW 52 kW
Maximum Loading Capacity 2000 kg
Working Table Height 35.5”/900mm
Maximum Loading Capacity 4.409lb / 1.000kg
Maximum Cuting Capacity X- Axis 5’/1530mm/60”
Y- Axis 10’/3050mm/120”
Z- Axis 5,90”/150mm

Axis movement

4 Axis and 1 Rotary Digital Motor System

Positioning system

Rack and Pinion (Servo Motor)

Acceleration speed (G)

1,5G

Axis Speed (X,Y Traverce Speed)

4,800 I.P.M / 120 m/mm

Additional Power Consumption

0KWh
Additional power consumption (with Linear motors) 19KWh 24KWh 32KWh 45KWh 53KWh

Positioning Accurasy

± .002”/.05mm

Repeatability

± .007”/.05mm

Repeatability

27sn/sec

Controller

19”TFF Touch Screen, Ethernet Enabled
Assit Gas Choosing Control 3 type of gases can be used
Presure adjustment values: 7.25 – 87 PSI;
Presure adjustment values: 7.25 – 87 PSI;

Machine weight

14,800KG
Pipe Cutting Max. Pipe Diameter Ø130mm
Min. Pipe Diameter Ø30mm
Max. Pipe Cutting Length 2900mm
Min. Pipe Reminder 150mm