MDHH CN2.
PDF Katalog ›
Characteristics
- NC controller (bending+plane)
- Plane of bend positioner
- Fully hydraulic clamping
- Up to Ø 90mm
Programs.

Programmable bend & plane positioning sequency (Y and Z axis) 25 programs (10 bends and 10 plane of bend rotations per program).

Z - NC programmable
Y - NC programmable
X - Sequentially adjustable flip stops
Technical Details.
MDH CN2-35 | MDH CN2-60 | MDH CN2-90 | |
Standard specifications | |||
Sequentially adjustable flip stops (x axis) | yes | ||
Fully hydraulic clamping | yes | ||
Plane of bend positioner (Z axis) Hydraulic clamp (optional) | yes | ||
Optional Equipment | |||
Automatic hydraulic mandrel extraction | yes | ||
Automatic hydraulic pressure die | yes | ||
Automatic hydraulic pressure die assist | yes | ||
Automatic mandrel lubrication | yes | ||
Hydraulic clamp for plane of bend positioner | yes | ||
Machine useful length increments (1m) | yes | ||
Split die system (square/rectangular/others) | yes | ||
Dies for profiles/tubes | yes | ||
Capacities | |||
Maximum bending OD x thickness (steel - 450 N/mm2) - (mm) | 35 x 3 | 60 x 3 | 90 x 3 |
Maximum bending OD x thickness (steel - 700 N/mm2) - (mm) | 30 x 2 | 50.8 x 2 | 76.2 x 2 |
Maximum bending side x side x thickness (steel - 450 N/mm2) - (mm) | 30 x 30 x 2 | 50.8 x 50.8 x 2 | 76.2 x 76.2 x 2 |
Maximum section modulus (steel - 450 N/mm2) - (cm3) | 2.2 | 7.3 | 22.2 |
Maximum bending Angle(°) | 190 | ||
Standard bending direction | Clockwise | ||
Working pressure - (bar) | 150 | ||
Power supply - (Volts-Hz-Phases) | 380V - 50Hz - 3P | ||
Technical information | |||
Power (kW) | 5.6 | 8.1 | 8.12 |
Dimensions (mm) | 4700 x 1000 x 1320 | 4950 x 1200 x 1330 | 5560 x 1550 x 1300 |
Weight (Kg) | 1150 | 1760 | 2427 |
Maximum Centerline bending Radius (mm) | 110 | 195 | 305 |
Maxium useful length (mm) | 3000 |